-
This communication device can transmit up to 32 unique symbols from one computer to another computer
at a distance of 1 meter apart.
-
The design of this project consists of two main parts: the transmitter and the receiver. The communication
meathod is based on light source and light sensor. By reading the input at the input station, the transmitter
operates a mechanical device which blocks off light from the light senor on the receiver of the output station
at a specific time interval. Thus the data is sent across the stations.
-
For the software component, two pieces of software (transmitter and receiver) written in C Language are installed to the
communicating computers to control the transmission of data between the two computer stations. Handshaking
verification process is included in the software too. Error detection and correction are implemented in both
software and hardware.
Graphic Overview of the System
Graphic Overview of the System
Schematic Diagram of the System
Schematic Diagram of the System
System State Flowchart
System State Flowchart
Project Evaluation
Project Evaluation
Classes:
The University of Southern California does not screen or control the content on this website and thus does not guarantee the accuracy, integrity, or quality of such content. All content on this website is provided by and is the sole responsibility of the person from which such content originated, and such content does not necessarily reflect the opinions of the University administration or the Board of Trustees