This project is to implement a simple 16-bit processor in the FLEX10k FPGA located on
the Ultragizmo board. The processor is able to execute a limited set of instructions, which
is stored in the SRAM also located on the Ultragizmo board. In addition to the circuitry
for the processor, an SRAM controller that accesses the SRAM is also implemented. The whole project
is written in Verilog.
The University of Southern California does not screen or control the content on this website and thus does not guarantee the accuracy, integrity, or quality of such content. All content on this website is provided by and is the sole responsibility of the person from which such content originated, and such content does not necessarily reflect the opinions of the University administration or the Board of Trustees