-
From 01/2010 to 05/2010, I designed and implemented the Trojan 2-dimensional mesh network-on-chip router in the course EE577b.
The project had 3 phases. The 1st phase was to design a single Trojan router and verify its functionality,
the 2nd phase was to design a 3x3 2D mesh router using 9 Trojan routers and verify its functionality, and
the 3rd phase was to synthesize, formally verify, place and route Trojan router. After completion of the
3 phases, I had produced a functional design that has high speed, small area and relatively low power.
Internal connections of each trojan_router node
Performance of the synthesized design*
*targeting Oklahoma State University's 0.18um standard cell library
*targeting Oklahoma State University's 0.18um standard cell library
The University of Southern California does not screen or control the content on this website and thus does not guarantee the accuracy, integrity, or quality of such content. All content on this website is provided by and is the sole responsibility of the person from which such content originated, and such content does not necessarily reflect the opinions of the University administration or the Board of Trustees